Jtech laser mounts for the 7w laser, 14w laser and 24w laser. For the Onefinity CNC only!!!!
 
What's included:
2 brackets (one to mount to the machine and one to mount to the wall or other surface for storage
1 laser mount
4 bracket screws
2 laser mounting screws*
 
The mount will attach directly to the back of your laser then will slide into place on the bracket that stays attached to the spindle or Makita mount. (however if you are using the shim with the 80mm mount and the 65mm 2.5 boot the bracket will not fit with the boot.) Comes with 4 screws to attach the bracket to the spindle/Makita mount and 2 thumb screws to attach the mount to the laser. Also comes with 2 sized brackets. The big one is for the 80mm mount and the small mount is for the Makita mount. Then you can use the other bracket to mount on the wall or your table to store the laser. 
*** does not come with a laser***
 
7-Watt
You will have to remove 2 studs from the back of the laser for the mount to fit.
Here is a video from Mitz showing how to remove them on the 7-watt. 2:30- 6:30 is the removal of the studs.
https://m.youtube.com/watch?v=Mv7MhcBp-zs&t=47s

*14-watt
For the 14-watt 2 types of screws are sent (you will only use 1 type depending on what type of laser you have). If the studs on your laser stick out the small thumbnuts will attach directly to the studs. If your studs do not stick out then you can use the longer screws to attach the mount.